Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
obrienw
New Contributor

Automatic Device Detection only working for one subnet.

FG110C, 5.0.7 Our LAN has 5 subnets, but all internet access is routed to the 10.0.0.0/24 subnet that the FortiGate port1 interface is on. The device detection is turned on, but only devices on the 10.0.0.0/24 subnet appear. How do I detect all the devices the FG is protecting?
2 REPLIES 2
Carl_Wallmark
Valued Contributor

Device detection is based on L2 networks, if its routed you will not detect all devices.

FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C

FCNSA, FCNSP---FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30BFortiAnalyzer 100B, 100CFortiMail 100,100CFortiManager VMFortiAuthenticator VMFortiTokenFortiAP 220B/221B, 11C
Matthew_Mollenhauer
New Contributor III

If you' re running a Windows/Mac environment you could look at getting FortiClient licences for each machine. Regards, Matthew
Top Kudoed Authors