Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
mumbles202
New Contributor II

Assistance with DHCP Relay

Hoping someone might be able to assist in fixing a configuration. Currently have 3 separate networks that use the FortiGate for internet. Lan 1 (192.168.100.0/24) and Lan2 (192.168.200.0/24) each are on a separate interface on the FGT.

 

Lan 3 (172.16.25.0/24) is also on a separate interface, but that network has a L3 switch acting as the gateway for all devices. The DHCP server resides on Lan 3 and while I have DHCP Relay enable on the FGT interface clients aren't getting DHCP leases. I've confirmed that the request is reaching the server and a lease is made, but it doesn't reach the client. I suspect what's happening is the L3 switch on Lan 3 is trying to send the response back to FGT interface on Lan3 and it's being dropped. 

 

Does that make sense. And if so, is there a way to permit this traffic?  

 

Edit think I figured this out and was a matter of some changes that were made for testing. Working as expected in terms of getting an IP. 

 

1 REPLY 1
sagha
Staff
Staff

Hi mumbles202, 

 

With you last edit, this looks to be resolved.

 

If you face any issue in future, you can run dhcp relay debugs on FGT that can clarify what is going on. 

 

diag debug application dhcprelay -1

diag debug enable

 

Thank you. 

Shahan Agha

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors