Hi FortiGate Community,
I'm considering replacing the current Windows AoVPN RRaS I have with a solution based on FortiGate. I aim to set up both a device tunnel (which connects before user login) and a user tunnel (which connects after user login).
So far, I've successfully configured the device and user tunnels separately. However, face issues when trying to run both tunnels at the same time.
Has anyone here successfully switched from Windows AoVPN RRaS to a Fortigate setup with both these tunnels? If so, I would really appreciate any advice, tips, or configuration steps you could share.
And any best practices that are important for this setup?
Thank you.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Are you trying IPsec dialup connection? If yes, in that case, you have to use peer ID for both tunnels to work in the same time. The following article as reference.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.