Version: 7.4.0.0427
OS: CentOS
I have created a CLI Configuration and would like to apply it to a network access policy, but I am not seeing any option in the Network Access view to actually apply the cli config to a specific policy.
I was able to apply the CLI within Model Configuration on a specific logical network from that view, but is there not a way to just apply it to a Network Access Policy?
I have reviewed the below documentation but not actually reading where/how to apply it to a policy.
https://docs.fortinet.com/document/fortinac-f/7.4.0/administration-guide/926300/network-access
Any help on this will be greatly appreciated.
Thanks
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Applying CLI configuration directly from the NAP Configurations is considered a legacy method and it's disabled by default. Applying the CLI from Model configurations is the suggested method.
Is there a specific scenario that you still need to use this legacy method?
If needed it can still be enabled from CLI as shown in this article:
globaloptiontool -name policy.access.allowDirectConfig -set true
I have applied it via model configuration. Thank you for the input.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1066 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.