Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
filipefaria
New Contributor

Altice ISP Globalconnect Solution "ipalias"

Does anyone has had any experience with Portuguese ISP Altice and their Globalconnect solution ?

I will have to setup a fortinet 60F on a customer, but the ISP has setup a bridge on Lan4 router port.

They told me that the wan interface has to be setup on a new interface on Vlan20 with a supplied /30 ip address (not the public ip) and then I have to setup in this same interface the /32 public address.

In Draytek for example this is called ipalias and they even supply a guide on how to setup https://www.draytek.pt/faqs/como-configurar-router-para-acesso-a-internet-via-altice-meo-globalconne...

 

This is an example of what data I will be supplied with :

VLAN Internet :20
IP WAN Local :100.64.22.50/30
IP WAN Remoto :100.64.22.49/30
IP Internet :83.240.147.121/32

 

 

2 REPLIES 2
AEK
Honored Contributor

  1. Set the VLAN id of your WAN port to 20
  2. Add primary IP 100.64.22.50/30
  3. Add secondary IP 83.240.147.121/32
  4. Add default route 100.64.22.49
  5. NAT your WAN traffic with 83.240.147.121
config system interface
edit wan1
set ip 100.64.22.50/30
set vlanid 20
config secondaryip
edit 1
set ip 83.240.147.121/32
next
end
end

config router static
edit X
set gateway 100.64.22.49
set device wan1
next
end

 

AEK
AEK
filipefaria
New Contributor

Thank you so much for your reply, will try as soon as possible.

Labels
Top Kudoed Authors