Hi Everyone,
I have a user group where I only want to allow one session by user. In other words, if the user ABC is logged on the VPN Client and other user log in with the same user (ABC) the result will be denied. I want this for all users in the firewall group.
Is that possible?
thanks
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
You can set that in the ssl setting to the number of concurrent vpn users. IIRC it works like this,
1: User TEST logins
2: now user TEST attempts to login in , the firewall warns this to this new request with the action to disconnect the 1st user TEST session
https://forum.fortinet.com/tm.aspx?m=159319
Ken
PCNSE
NSE
StrongSwan
toshiesumi wrote:This seems to be the same conversation.
https://forum.fortinet.com/tm.aspx?m=159319&tree=true
emnoc wrote:Hi both,You can set that in the ssl setting to the number of concurrent vpn users. IIRC it works like this,
1: User TEST logins
2: now user TEST attempts to login in , the firewall warns this to this new request with the action to disconnect the 1st user TEST session
https://forum.fortinet.com/tm.aspx?m=159319
Ken
I've tried that, but not successful
thanks
Is it the same fortigate for the two logins? Did you run any diag debug app sslvpn -1 and monitor what the firewall thinks
Ken
PCNSE
NSE
StrongSwan
emnoc wrote:Is it the same fortigate for the two logins? Did you run any diag debug app sslvpn -1 and monitor what the firewall thinks
Ken
Hi Ken,
Is the same Fgt. Yes I run the debug and don't spot anything unusual.
The user came from LDAP, is that relevant?
Thanks
Hi ,
Any solutions to this problem .I am facing similar issue .
The Below command configured for LDAP group as well as Local group .Don't work .Appreciate for expert advice .
# config user group # edit "fortilab_exchange" # set auth-concurrent-override enable # set auth-concurrent-value (1-100) # end
Regds,
Ashik
Plima wrote:Hi Everyone,
I have a user group where I only want to allow one session by user. In other words, if the user ABC is logged on the VPN Client and other user log in with the same user (ABC) the result will be denied. I want this for all users in the firewall group.
Is that possible?
thanks
Yes, under the SSL-VPN Portal select your portal and enable the "Limit Users to One SSL-VPN Connection at a Time" option. You could use the CLI command too:
FGT# config vpn ssl web portal FGT (portal) # edit web-access <-- Portal name FGT (web-access) # set limit-user-logins enable
Hope it helps!
Prab
Hi,
I need this configuration for Tunnel access not web .
Any idea.
Regds,
Ashik
This configuration can also be used for tunel mode.
FGT01 (full-access) # show config vpn ssl web portal edit "full-access" set tunnel-mode enable set web-mode enable set limit-user-logins enable set ip-pools "SSLVPN_TUNNEL_ADDR1" set split-tunneling-routing-address "DMZ" "LAN" config bookmark-group edit "gui-bookmarks" next end set theme green next end FGT01 (full-access) # [style="background-color: #ffff00;"]set limit-user-logins[/style] [style="background-color: #ffff00;"]enable[/style] Enable setting. disable Disable setting.
limit-user-logins Enable to limit each user to one SSL-VPN session at a time.
NSE4, NSE5, NSE6, NSE7
CCNA R&S, CCNA Wireless, HCNA
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1692 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.