Hello Expert,
Yesterday i factory reset my 524D switch.
I connect the cable from laptop to the management port on the switch but was not able to login in.
Upon troubleshoot I realize I cannot ping the interface.
The only access I have to the switch is via command line.
I humbly request some guidance to enable access via the management port using the default ip (192.168.1.99)
Thank you
Regards
Solved! Go to Solution.
Hi,
As you have only CLI access to the FortiSwitch, would you please try:
config system interface
edit internal
set ip 192.168.1.99 255.255.255.0
set allowaccess ping https http ssh
set type physical
end
end
As reference you can check on page 30 here: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/b895b007-f1f3-11e9-8977-005056...
Best regards,
Vasil
Hi,
As you have only CLI access to the FortiSwitch, would you please try:
config system interface
edit internal
set ip 192.168.1.99 255.255.255.0
set allowaccess ping https http ssh
set type physical
end
end
As reference you can check on page 30 here: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/b895b007-f1f3-11e9-8977-005056...
Best regards,
Vasil
Hello Vasil,
Thanks for the guidance I tried your suggestion and it worked.
Thank you
Regards
User | Count |
---|---|
2152 | |
1190 | |
770 | |
451 | |
347 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.