Advpn via Dedicated WAN

[HS08]

I have topology below where we have 3 WAN connection from different provider.

With this topology, in the hub i create loopback interface and set as dialup vpn interface.

On the spoke it's better to create loopback interface and put the tunnel under this loopback, or put the tunnel directly under the physical port (example port1 on spoke1)

[Stephen_G]

Hello,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[HS08]

have any update?

[djp]

Your IPSEC interfaces will use your true interface IP's  (wan1, wan2, etc...)  This is true for both HUB and SPOKE.

Make sure you use BGP on Loopback as it is the recommended way

Here is my video: https://youtu.be/04BjjyMYEEk?si=5lZijr1-t1BWtJkq