Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
tech1uae
New Contributor

Adding Port 4 back to the Hardware Switch

Hi,

 

Can anyone please help me with this? A new client of mine has an existing EF100 and it looks as though someone before has made Port 4 standalone to try and configure a Guest network.

 

I have since created a Guest VLAN and would like to add the Port back into the Hardware Switch. However, I have absolutely no idea how to get it back in. I've looked everywhere.

 

Thanks!

 

Andy

7 REPLIES 7
ede_pfau
SuperUser
SuperUser

Just edit "lan" by double-clicking it. You'll find an input field "members" featuring a '+'. Click this and a list of available ports will show up.

Note that all references to the port need to be removed in order to make it selectable. That is, DHCP server, NTP server, VIPs, VLANs etc.etc.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
tech1uae

Thanks for the reply.

 

The port is showing under Physical Interfaces, has no references and won't allow itself to be added to the Hardware switch.

 

Cheers.

ede_pfau

Re-check in CLI:

conf sys virtual-switch

ed lan

config port

edit ?

 

You should now get a list of available ports.

If port4 does not show up, check where it's used (don't trust the GUI too much):

- get a backup, unencrypted

- search in your favorite editor for "port4" and, if found, remove reference in the CLI

 

If the port is not used anywhere there's no reason it couldn't be used in the hw switch.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
tech1uae

Thanks,

 

I'm getting:

 

*All    members of physical switch sw0:
port4
 
current members of lan
 
port1   
port2   
port3   
port5   
port6   
port7   
port8   
port9   
port10   
port11   
port12   
port13   
port14   
port15   
port16   
 
ede_pfau

Check here for the missing port:

config system switch-interface
    edit "sw0"
        set vdom "root"
        set member "internal5"
    next
end
If you 'unset member xxx' it should free the port.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
tech1uae

Got it sorted using the GUI. It was set to DHCP mode rather than manual.

 

As soon as I turned off the DHCP, it allowed me to add back to the switch.

 

Thanks for your help!

ede_pfau

What exactly was set to DHCP - the switch or port4?

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors