Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
AliAllafzadeh
New Contributor III

Add test

test

1 Solution
ozkanaltas
Valued Contributor III

Hello @AliAllafzadeh ,

 

You need to configure 2 routes. 

 

First, configure the route on the route table like this,

 

Address Prefix: 0.0.0.0/0.0.0.0

Next hop type: Virtual Appliance

Next hop IP: 172.16.136.68

 

Second, configure the route on Fortigate like this,

 

Destination : 192.168.0.0/24

Gateway: 172.16.136.65

Device: Port2 

 

Example for azure side

image.png

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW

View solution in original post

If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
8 REPLIES 8
ozkanaltas
Valued Contributor III

Hello @AliAllafzadeh ,

 

No need to vnet peering for this case.  Did you configure a static route for the new subnet on FortiGate? 

 

Also, can you check the traffic flow on Fortigate with this command?  With this command, we can ensure whether traffic reaches Fortigate or not. 

 

diagnose sniffer packet any 'host 192.168.0.x' 4 a  ( "x" should be changed with client IP)

 

After running this command can you try to reach somewhere?

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
AliAllafzadeh

Delete it please

ozkanaltas
Valued Contributor III

Hello @AliAllafzadeh ,

 

No need to configure the interface for each new network. 

 

But you should configure the gateway IP address with your ILB IP address. When I look at the screenshot you sent. You need to change the gateway IP address to 10.2.8.65. 

 

And you say we added a new network with 192.168.0.0/24 prefix. You need to configure a static route like this. 

 

Destination : 192.168.0.0/24

Gateway: 10.2.8.65 or your ILB floating IP address

Interface: Port2

 

Also, 168.63.129.16 is the IP address used for ha communication. You should not do any changes to this IP address like a configure static route.

 

For traffic consistency, I suggest, you configure source-IP-based persistence on Azure ILB/ELB. 

 

https://learn.microsoft.com/en-us/azure/load-balancer/distribution-mode-concepts

 

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
AliAllafzadeh

Delete it please

ozkanaltas
Valued Contributor III

Hello @AliAllafzadeh ,

 

 I suggest, you configure source-IP-based persistence on Azure ILB/ELB. 

 

https://learn.microsoft.com/en-us/azure/load-balancer/distribution-mode-concepts

 

Can you run this command on both firewalls and try to reach somewhere? Can you share output with us?

 

diagnose sniffer packet any 'host 192.168.0.x' 4 a  ( "x" should be changed with client IP)

 

 

 

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
AliAllafzadeh

Delete it please

ozkanaltas
Valued Contributor III

Hello @AliAllafzadeh ,

 

You need to configure 2 routes. 

 

First, configure the route on the route table like this,

 

Address Prefix: 0.0.0.0/0.0.0.0

Next hop type: Virtual Appliance

Next hop IP: 172.16.136.68

 

Second, configure the route on Fortigate like this,

 

Destination : 192.168.0.0/24

Gateway: 172.16.136.65

Device: Port2 

 

Example for azure side

image.png

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
AliAllafzadeh

Delete it please

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors