Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
JerryPWhite1
New Contributor II

Add new subnets to exisitng site-to-site ipsec vpn

I am trying to add two subnets to already existing site-to-site ipsec vpn. I tried adding them under phase two to no avail. I don't know where to start troubleshooting.

Jerry Paul White

Network Engineer/Tech Supervisor

" 01001000 01100001 01110110 01100101 00100000 01100001 00100000 01000111 01101111 01101111 01100100 00100000 01000100 01100001 01111001"

Jerry Paul White Network Engineer/Tech Supervisor " 01001000 01100001 01110110 01100101 00100000 01100001 00100000 01000111 01101111 01101111 01100100 00100000 01000100 01100001 01111001"
2 REPLIES 2
Toshi_Esumi
Esteemed Contributor III

If you have created the existing ipsec tunel with the wizard specifying with site-to-site, you might now have "Add" button in phase2 selector config.

Click the button "Convert To Custom Tunnel" at the top  then you can have the Add button.

 

Toshi

sstrudwick
New Contributor

yo should be able to. did you also add the new subnet to the routing tables and the firewall profiles? that has bit me more than once.

 

Labels
Top Kudoed Authors