Add new hub to an existing sdwan deployment

[Nemesis31]

Hi Experts,

I am looking for some guidance on how to go about adding a new hub to an existing sdwan deployment. I'd really appreciate if there are any sample configurations of a dual hub setup for reference.

Thanks

[Anthony_E]

Hello ,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Skytech1]

Hey @Nemesis31 

The current hub is internet or MPLS? Does the new hub would be internet or MPLS?

If both are internet and you are configuring ADVPN, you should not have problems if you are using ADVPN, you can check this link for guidance

https://docs.fortinet.com/document/fortigate/6.2.16/cookbook/820072/advpn-with-bgp-as-the-routing-pr...

If you are not using ADVPN and the traffic is routed from spoke a to the hub and then forwarded to the spoke b, any dynamic routing protocol would do the job.