- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Add fortigate in fortiganalyzer
I added my fortigate in fortianalyzer and the logs do not arrive, in fortigate the status appears as connected, but in fortianalyzer the logs are not received.
I'm using the demo version of fortianalyzer and I'm connecting a fortigate 60E firmware 7.2.0
I believe it is a configuration error, since this is the first time I perform this procedure.
- Labels:
-
FortiAnalyzer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ruzeski
You may want to check with the following document:
On the FortiGate, if you run the command "exec log fortianalyzer test-connectivity" and noticed Log: Tx & Rx (log not received), you will need to set reliable to enable. The command to enable reliable is as below:
config log fortianalyzer setting
set reliable enable
end
Kayzie Cheng
If you have found a solution, please like and accept it to make it easily accessible for others.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
managed to solve the issue.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
first thank you for collaborating. I ran the suggested command but the problem persists, I still don't receive the logs.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi @ruzeski
Can you please let me know what's the firmware of the FAZ that you are currently using?
Kayzie Cheng
If you have found a solution, please like and accept it to make it easily accessible for others.
