Add fortigate in fortiganalyzer

[ruzeski]

I added my fortigate in fortianalyzer and the logs do not arrive, in fortigate the status appears as connected, but in fortianalyzer the logs are not received.

I'm using the demo version of fortianalyzer and I'm connecting a fortigate 60E firmware 7.2.0

I believe it is a configuration error, since this is the first time I perform this procedure.

[kcheng]

Hi @ruzeski 

You may want to check with the following document:

https://community.fortinet.com/t5/FortiAnalyzer/Troubleshooting-Tip-FortiGate-to-FortiAnalyzer-conne...

On the FortiGate, if you run the command "exec log fortianalyzer test-connectivity" and noticed Log: Tx & Rx (log not received), you will need to set reliable to enable. The command to enable reliable is as below:

config log fortianalyzer setting

set reliable enable

end

[yeowkm99]

managed to solve the issue.

[ruzeski]

first thank you for collaborating. I ran the suggested command but the problem persists, I still don't receive the logs.

[kcheng]

Hi @ruzeski 

Can you please let me know what's the firmware of the FAZ that you are currently using?