I added my fortigate in fortianalyzer and the logs do not arrive, in fortigate the status appears as connected, but in fortianalyzer the logs are not received.
I'm using the demo version of fortianalyzer and I'm connecting a fortigate 60E firmware 7.2.0
I believe it is a configuration error, since this is the first time I perform this procedure.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @ruzeski
You may want to check with the following document:
On the FortiGate, if you run the command "exec log fortianalyzer test-connectivity" and noticed Log: Tx & Rx (log not received), you will need to set reliable to enable. The command to enable reliable is as below:
config log fortianalyzer setting
set reliable enable
end
managed to solve the issue.
first thank you for collaborating. I ran the suggested command but the problem persists, I still don't receive the logs.
Hi @ruzeski
Can you please let me know what's the firmware of the FAZ that you are currently using?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1721 | |
1098 | |
752 | |
447 | |
234 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.