Add VLAN to Transparent mode

[azwanarif]

Hi All,

Currently we are planning to add Fortigate 90D for a small server room hosting at the ISP data centre.

All ISP switches are assigned with VLAN and fortigate will be configured as transparent mode to for monitoring and protection purpose.

Appreciate if someone can guide on how to add or tagged VLAN interface on transparent mode. Thanks

[zohaibm27]

HI,

 You can Simple create vlan go to System>>Interface>create new assign VlanID,name and select interface and press ok.

you can not assign IP address because of transparent mode, and just create policy to allow traffic.

Thanks,

Zohaib Khan

FCSNA,CCNA,MCP

[azwanarif]

Hi zohaibm27,

Does multiple VLAN required need to assign to Internal Interface or WAN on transparent mode?. Thanks

[Benoit_Rech_FTNT]

Hello,

you can found best practices about how to configure and to use Fortigate VDOM is tranparent mode in this KB article.

http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=FD30087&sliceId=1...

Benoit