Hello,
I have an issue with accessing web page by VPN SSL web mode.
When I'm using forticlient (SSL VPN) everything is OK.
Issue is that page is not openning - after I clicked on bookmark is
My architecture is:
INTERNET client with web browser -> FortiG1(Site1)<- ipsec tunel -> FortiG2(Site2) -> Server
Facts:
Pages from Site1 are working by SSL VPN webmode
Pages from Site2 don't work by SSL VPN webmod, i tried few servers
But as mentioned abowe , when I use FortiClient(configured to use SSL VPN Tunel mode) everything is OK, I can open pages from both sites
Could You please advice me where I should start to check ??
Thank You
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
Do both FortiGates run the same firmware?
Hello,
yes, 7.0.9
Hello,
You may consider to sniff the traffic (diagnose sniffer packet any 'host <server IP>' 4 0 a) and try to trigger the issue. It will help to check whether URL is resolved and TCP and TLS (if applicable) sessions are established.
hello,
I make this command on FortiG1(Site1) and then i opned url
result below
023-01-13 09:57:00.683389 Internetl-link out 77.245.x.x.2156 -> 10.0.4.7.8080:: syn 2181435520
2023-01-13 09:57:01.675735 Internetl-link out 77.245.x.x.2156 -> 10.0.4.7.8080: syn 2181435520
2023-01-13 09:57:03.675734 Internetl-link out 77.245.x.x.2156 -> 10.0.4.7.8080: syn 2181435520
2023-01-13 09:57:07.685737 Internetl-link out 77.245.x.x.2156 -> 10.0.4.7.8080: syn 2181435520
This IP 77.254.x.x. im using to login to SSL VPN Portla
Shouldn't FortiG1 change public ip for some privet IP ??
Thanks
Hello,
There can be potentially issue with routing. Based on the name "Internetl-link" I would assume it is WAN interface. You can check whether specific route towards the server exists "get router info routing-table details 10.0.4.7".
hello,
routing looks OK
Routing table for VRF=0
Routing entry for 10.0.0.0/8
Known via "static", distance 20, metric 0, best
* via Link1-ISP tunnel 133.27.x.x
* via Link2-Fiber tunnel 10.254.254.2
Hello,
Is there policy route configured or tunnel was down? Traffic sniffer indicates that packet towards 10.0.4.7 is sent via Internetl-link interface instead of Link1-ISP/Link2-Fiber.
hello,
no, we don't have Advanced Routing enabled (so policy route also).
tunel is up , other services between sites are OK
BTW
IPSEC over ISPs looks like below:
FortiG1(Site1 ISP-a 77.245.x.x)<- ipsec tunel -> FortiG2( Site2 ISP-b 133.27.x.x)
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1732 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.