Hello,
I hope everyone is doing well.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Team,
You need to create firewall policy to allow the traffic from that specific source IP address with destination as all the URLS and IP address mentioned in this website URL:
So that specific IP address will be able to access only these URL address
Please check and keep us posted
Created on 06-07-2022 03:23 AM Edited on 06-29-2022 06:48 AM
Hello Seshuganesh,
Thank you for your return and information.
I will try and get back to you if needed
Thanks again for your great support.
Regards.
Hello NEAHR,
FortiOS : 5.2.7 is very old and has already reached end of engineering support.
You may consider to configure to use ISDB. Please find more information about ISDB entry by following the link below:
https://www.fortiguard.com/encyclopedia/isdb/327880
Created on 06-07-2022 03:26 AM Edited on 06-29-2022 06:48 AM
Hello Abarushka,
Thank you for your return and information.
Yes I know but the equipment is being replaced by a more performing Fortigate.
I'll follow the shared link and come back to you if needed.
Thx again for your great support.
Regards.
Hi NEAHR Mohamed. There are 2 ways to achieve this.
1st - using Application Control. Only allow Office365 related applications.
2nd - using ISDB. Only allow IP address of Office365 related.
However, version 5.2.7 is already obsolete and no engineer support/signature will be release anymore. Signature keep changing from to time and i would suggest to upgrade the Fortigate to major version 6.2, 6.4 or 7.0. So you will have latest update on the signature database to achieve your requirements effectively.
Created on 06-07-2022 03:30 AM Edited on 06-29-2022 06:49 AM
Hello Muhammad,
Thank you for your return and information.
I will try and get back to you if needed
For the version of FortiOS yes I know but the equipment is being replaced by a more performing Fortigate and especially the support
Thanks again for your great support.
Regards.
Hello,
Sorry for my late return.
I hope you are all right.
Please,
concerning the creation of the links to the microsoft servers I create them at which level :
- Addresses
- Services
Also, possible to copy and paste all ''FQDN IPV4 IPV6'' addresses on the same rule ?
And for the indicated port I create it too ? or it is predefined.
Regards.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.