Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Xenitel
New Contributor

Access to both firewalls in HA

I have two Fortigate 200F I am trying to set up in an active-active HA environment to replace our current 200D firewalls.  When I engage HA I lose access to the slave firewall.  Is this normal behavior?  Our 200Ds are in an active-active environment, and I can access both firewalls together.

 

Thanks.

1 Solution
ntaneja
Staff
Staff

Hi Xenitel

 

Let us know if you are using HA mgmt interface to access the device or some other way?
If HA mgmt interface, you need reserved mgmt interface IP to access both device

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/1901...

 

Thanks

View solution in original post

2 REPLIES 2
ntaneja
Staff
Staff

Hi Xenitel

 

Let us know if you are using HA mgmt interface to access the device or some other way?
If HA mgmt interface, you need reserved mgmt interface IP to access both device

https://community.fortinet.com/t5/FortiGate/Technical-Tip-HA-Reserved-Management-Interface/ta-p/1901...

 

Thanks

Xenitel

Well, I was just using the basic mgmt ports, but will try the HA mgmt ports instead.  I will let you know.  Thanks.

 

Labels
Top Kudoed Authors