Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
epctest
New Contributor

AP logs

These commands do not work from the AP prompt to delete the flash logs. I dont have a controller, just need to get everything cleared off of them so we can get rid of these

 

file areaerase logk0

file areaerase logk1

 

 

7 REPLIES 7
gfleming
Staff
Staff

What model of AP? What version of software?

Cheers,
Graham
epctest

AP FAP-U421E FAP-U421EV-A 

FortiAP-U421EV v6.2,build0220,210106 (GA)

Proost

gfleming

the file command you listed is for older-generation Meru-based AP's.

 

for FAP-U421E you can just type "factoryreset" to reset factory settings.

Cheers,
Graham
epctest

After it reset it returns to a configuration mode or not sure if its called Meru or something. When you enter 'flashcmds show' it has a bunch of logs. You can clear the dmegs logs but boot logs still remain. 

gfleming

OK sounds like you have the Meru infrastructure boot image enabled.

 

You can reset to factory default by pressing the reset button for 10 seconds. This should clear everything off the AP.

 

More info here: https://docs.fortinet.com/document/fortiap-u/hardware/fortiap-u421ev-u423ev-quickstart-guide

Cheers,
Graham
epctest

That clears everything but the logs.

gfleming

Interesting. To be honest I have no experience with the Meru software. I wonder if you convert it to the Fortinet software if that would clear things?

 

Can you try selecting the Fortinet firmware image and rebooting and see if you still see the files?

Cheers,
Graham
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors