Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
siobhan
New Contributor

802.1q tagged link without a native Vlan / Pvid ??

Hello All

 

Can the Fortiswitch 108E support a 802.1q tagged link without configuring a native Vlan / Pvid  ?

We wish to introduce some Forti108E to the an ISP supplied link.

I need to confirm that the Forti108E will support a 802.1q tagged link without a native Vlan / Pvid being configured on the uplink.

This would be an acceptable Switch to Switch design however it is appearing that the Forti108E requires a native Vlan configured on 802.1q interfaces.

 

Any info appreciated .

 

Thanks

 

Siobhán

1 REPLY 1
FredPaul
New Contributor III

Hi,

I know this is an old post, but why is setting a pvid a problem? For vendors where you don't specify the pvid it will be the native vlan, which is usually vlan 1. If you don't want it to be vlan 1 you can create a "dummy" vlan, say vlan 4000, and use that as your pvid. The best practice is to have a matching pvid on both ends.

-Fredrik
-Fredrik
Labels
Top Kudoed Authors