Hi everyone,
I'm using Fortigate 301E with os 6.4.3, I have a very strange problem, the default NPU_vdom_link didn't work at all. The traffic was ended by the NPU vdom interface, and it didn't forward to another one. I try to create two vlans attached to both NPU-vdom-link, but without luck.
So I try to use traditional vdom link instead, by creating a new vdom link interface, everything works fine!!!
But the traditional vdom link can't use as a SD-WAN member.
Is this the bug in FortiOS 6.4.3?
Solved! Go to Solution.
Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.
Ken Felix
PCNSE
NSE
StrongSwan
Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.
Ken Felix
PCNSE
NSE
StrongSwan
emnoc wrote:Run the "diagnose sys sdwan member" command and see what the fortios shows. I'm sure you can install vdom links in a SDWAN as members. open a ticket to confirm with support.
Ken Felix
Thanks for reply~
I create a new normal vdom-link, and added it to SD-WAN member successfully, and set the Gateway IP from another vdom's and it works fine~
But the NPU-vdom-link still not working, I don't know whether it's a FortiOS issue.
The service contact is out of date and I can't contact support. If you know any settings about NPU-vdom-link please let me know~
Thank you.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.