5060 UDP not forwarding

[henry_buenafe]

Hi Guys,

Need some help, I create a policy with port forwarding on UDP 5060, but it not forwarding. I try TCP assign port 5060 and it was open although UDP is close. Any idea? 

below are my configurations:

Create Virtual IPs: TCP and UDP with port mapping 5060 (assign Public IP and local IP)

Create Virtual IP group: Add the TCP and UDP created.

Create Policy: frm: WAN --> To: Local Interface:  -->Source: all --> Destination: TCP/UPD created --> Schedule: Always --> Service: All -->Action: Accept --> Nat: Disable

Only TCP port is open but UDP is close. need help pls..

Thank you 

[mahesh_secure]

Hi

check this port is open from internal network. ( try port scan on local ip)

Regards

Mahesh

[tanr]

I think you're running into the automatic SIP handling.

See http://kb.fortinet.com/kb/documentLink.do?externalID=FD36152 for a description.