Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
New Contributor

5.2.4 WanOpt GUI



Is it possible to display on GUI Wan & Opt menu?





1 Solution
New Contributor III

I put in a ticket about this as we use wanopt on our 60D and 111Cs. According to tac, you can no longer configure wanopt through the gui and it cannot be enabled. All config and diagnostics must be done through the CLI now. Really frustrating as there is no mention about it in the release notes for 5.2.4 and the feature matrix shows wanopt is available on those devices. This change really makes wanopt undesirable for us as it is much harder to troubleshoot wanopt issues in the cli vs gui.

View solution in original post


config log disk setting
set status {enable | disable}
BTW, you're not required to guess CLI commands. It's all documented in the "CLI Reference". This is not rocket science to look it up, or the wan opt commands.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Top Kudoed Authors