3G/4G USB Modem Compatibility

[mgoral]

Hi, I would like to know, the compatible 3G/4G USB Modem with FortiWifi 40C. I was looking on the net, but I can' t find anything :( Could you help me? :)

[ede_pfau]

I forgot to mention that you would only need to

config sys modem

if the modem parameters were not already known to the FGT (which is not the case with your D-link). In any case you'd have more control over all parameters by using these options.

[rmanzanilla]

Hi, 

I Hope help you:

http://docs.fortinet.com/uploaded/files/2440/fortigate-modem-compatibility-matrix.pdf

If doesn't appear, you can configure a personal modem.

best regards!

[Haris2887]

This is Some Great Info.

I am using a Huawei E8372 LTE (hi-Link/usb-switch) modem and not serial.

The Modem works out of the box in a 60D,80D and 90D .

All i have to do is

config sys lte-modem

set status en

however the same command does not work in a 100D or a 600D running the same code 5.4

From the 90D

----------------------------------------------------------------------------------------------

T: Bus=02 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=14db Rev= 1.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=CDCEther
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=CDCEther
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

FG90D # config system lte-modem

FG90D (lte-modem) # get
status : enable
extra-init :
authtype : none
apn :
modem-port : 255
mode : standalone
holddown-timer : 30

FG90D # diagnose sys lte-modem
info LTE Modem InformationFG90D # diagnose sys lte-modem info
LTE Modem configuration enabled!
LTE Modem device initialized.
Manufacturer:
Model:
IMEI:
USB Modem Interface:
SIM State:
ICCID:
Signal Strength:
Network Type:
APN:
Authen Type:
Extra Init String:
Interface mode:
Holddown Time:

---------------------------------------------------------------------------------------------------------------------------- From the 600D

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=12d1 ProdID=14db Rev= 1.02
S: Manufacturer=HUAWEI_MOBILE
S: Product=HUAWEI_MOBILE
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

info LTE Modem Information

600D-FW1 # diagnose sys lte-modem info
LTE Modem configuration enabled!
LTE Modem device not initialized!
Manufacturer:
Model:
IMEI:
USB Modem Interface: down
APN:
Authen Type: none
Extra Init String:
Interface mode: standalone
Holddown Time: 30

any ideas what it could be that the stick works in small Fortigates and not in the larger Fortigate all running the same code. ths only thing i can notice is that both devices use a different CDC Ethernet driver. CDCETHER vs cdc_ether.

[amf]

Hi,

Did you get anywhere with this - we see similar output on an 80E.

[johnminaa]

Hi,  I have the same question but I want to know the configuration of the 4Gx modem with FortiWifi 40C. 

It will be the same as for 3G/4G modem or change...

[pouleto]

Bump.

Any news about a USB key MODEM for Fortigate ?