Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
asgspl
New Contributor

/29 shared between multiple VDOMs

Hi Guys,

 

I need to switch one of my sites to VDOMs and I need to share the WAN interface /29 between them.

I've currently got a /29 on my WAN but I've been told I need a /32 as the main IP and the /29 be routed via the /32.

Could I split the /29 an allocate a public IP address to each of my VDOMs ?

 

Do I need the /32 ? Important to mention is that I don't want to use any VIP setup as I want the a public IP address on each of my WAN interfaces in each of my VDOMs.

 

Cheers,

TC

 

1 REPLY 1
emnoc
Esteemed Contributor III

Not sure what your asking but if you have the ports you could assign two wan-ports for the two vdoms. It will uses more  ports but will give you  what you need

 

e.g

 

wan1-vdom 1.1.1.2/29

wan2-vdom 1.1.1.3/29

 

Alternatively you could stack vdom#2 and route that traffic thru vdom#1, this will make vdom#1 the gatekeeper for  traffic entering/exiting the vdom of #2

 

ken

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors