Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
dbewernick
New Contributor

221E broken firmware

Hi together,

we are a non-profit organization and have 3 of 9 FortiAP 221E broken after the PoE switch was rebooted during FW upgrade of the AP. It seems the APs have lost power during the upgrade and now do not come online anymore. They only show the power LED on with a short 1-time off-on flash every 15 seconds. The network port is not coming up anymore.

I already tried a factory reset by holding the reset button for 15 seconds while powering the AP with 12V, but this did not help.

Since they are all out of support, anyone has an idea what I can try to get them back to life? Sadly they don´t have a console port or so.

 

Thanks for any help!

4 REPLIES 4
abelio
SuperUser
SuperUser

Hi

Try to contact Fortinet TAC staff opening a case.

Following your description, it smells like a possible RMA

 

 

regards




/ Abel

regards / Abel
gfleming
Staff
Staff

Echoing what the other contributor mentioned, please call TAC. You have lifetime warranty on these APs so even though you do not have support contract they should be able to provide RMA for hardware failure.

Cheers,
Graham
mr_vaughn
New Contributor III

I have bricked many AP recently. You have to follow upgrade path. Which is in release notes ONLY!

I have bricked many E gens with going from 6.0.x to 6.4.x or 7.0x...

 

dbewernick
New Contributor

I managed to open a RMA case and will send the broken APs to Fortinet today. Fingers crossed! ;)
Thank you all for the tipps so far.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors