I have 200F single firewall, firmware is 7.2.2 Build 1255.
I am trying to set MGMT as OOB from CLI but the command "config system dedicated-mgmt " is not available. I was able to do the same on 401E firewall but on 200F firewall it's not available, please assist.
FW # config system 3g-modem Configure 3G modem. accprofile Configure access profiles for system administrators. acme Configure ACME client. admin Configure admin users. alias Configure alias command. api-user Configure API users. arp-table Configure ARP table. auto-install Configure USB auto installation. auto-script Configure auto script. automation-action Action for automation stitches. automation-destination Automation destinations. automation-stitch Automation stitches. automation-trigger Trigger for automation stitches. autoupdate Configure automatic updates. central-management Configure central management. console Configure console. csf Add this FortiGate to a Security Fabric or set up a new Security Fabric on this FortiGate. custom-language Configure custom languages. ddns Configure DDNS. dhcp Configure DHCP. dhcp6 Configure DHCPv6. dns Configure DNS.
The 400E has an NP6 chipset in it while the 201F has an NP6X-Lite. There are some different capabilities in the different chipsets. According to the documents regarding the dedicated-mgmt setting "Using this command is not recommended and it is not available on all FortiGate models."
If you are looking to have all fortigate services use the mgmt ports instead of the traffic ports, then I would look at split-task vdom. This is the best way to seperate management and traffic interfaces/traffic.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.