Hi Everyone,
I have a 100D, i previously had my wildcard certificate installed but it expired. When i try to re-install it I get an error with the manage IP, it highlights it red. I haven't changed the settings from last year. Any ideas?
Secondarly the fortigate has a built in VPN, but i understand you can't use it in Transparent mode, is this right?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
hi,
there have been some troubles with management IP settings ("overlapping address") in the recent past. Check that you set the interface role to 'undefined' in the interface setup page. This is not guaranteed to help but it worked for me.
Second, yes you can use a transparent FGT as IPsec VPN gateway, but only if you create the VPN in policy mode (in contrast to the usual interface mode). Policy mode VPN creates the corresponding route from the source/destination addresses used in the policy. You will need to take a long look into the FortiOS Handbook.
Thanks for that, i'll start hunting the VPN area. As for the interface, I can't find that setting. I'm on firmware FortiOS v5.6.0, Build 1449
Then it's probably not the cause of your troubles. I've had some nasty experiences with this in v5.4.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.