2 Dialup vpn branches not reach each other

[TaherOthman]

Heloo ,,

I have HQ with static IP WAN , and connect some branches using dialup vpn to HQ and work fine, data Vlan and voice vlan can reach HQ Vlans

But Voice Vlan from Branch A to B not work ,, work only A to HQ or B to HQ 

Any advice to solve this issuev ,,

Regards 

[abarushka]

Hello,

In order to isolate the issue and find the root cause I would recommend to sniff traffic and collect debug flow:

sniffer:

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Using-the-FortiOS-built-in-packet-sn...

debug flow:

https://docs.fortinet.com/document/fortigate/6.2.14/cookbook/54688/debugging-the-packet-flow

[kvimaladevi]

Hi Taher,

Please make sure the phase 2 interfaces on A, B and HQ has mapping for required source and destination. Please make sure appropriate policies are available on HQ for traffic from tunnel A to go to tunnel B.

Regards,

Vimala

[TaherOthman]

Many thanks ,, I will check and reply you

Regards