Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
supportombm
New Contributor III

2 Concurrent Dialup VPN dropped

Hi!

I have 2 differents customer who have a Dialup VPN to connect to our Cloud platform.

I noticed that when costumer B establish the Dialup VPN the customer A got dropped.

Can someone explain to me why and how can i fix this?

 

They are on different subnet but on the same firewall FVM00

Customer A 128.2.1.0/24

CLOUD A 192.168.20.10/32  (interface port A)

 

Customer B 172.254.60.0/24

CLOUD B 192.168.43.10/32 (interface port B)

 

Can someone explain to me why?

Is it possible that i need to add set-add-route disable on both VPN? i need to do that on Customer and Cloud firewall Phase1?

 

P.s: They have Dialup because they are both on 4G failover SIM with natted IP

2 REPLIES 2
sw2090
SuperUser
SuperUser

I guess this is a routing issue. This gives a solution: https://forum.fortinet.com/tm.aspx?m=73864

 

-- 

"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams

-- "It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
ede_pfau

My guess is that the FGT cannot distinguish between both, probably because you are not using peerIDs. Without peerIDs you can only run one (1) dialup-VPN per FGT. Please check your config and re-read the VPN chapter in the Handbook.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors