Hi!
I have 2 differents customer who have a Dialup VPN to connect to our Cloud platform.
I noticed that when costumer B establish the Dialup VPN the customer A got dropped.
Can someone explain to me why and how can i fix this?
They are on different subnet but on the same firewall FVM00
Customer A 128.2.1.0/24
CLOUD A 192.168.20.10/32 (interface port A)
Customer B 172.254.60.0/24
CLOUD B 192.168.43.10/32 (interface port B)
Can someone explain to me why?
Is it possible that i need to add set-add-route disable on both VPN? i need to do that on Customer and Cloud firewall Phase1?
P.s: They have Dialup because they are both on 4G failover SIM with natted IP
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I guess this is a routing issue. This gives a solution: https://forum.fortinet.com/tm.aspx?m=73864
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
My guess is that the FGT cannot distinguish between both, probably because you are not using peerIDs. Without peerIDs you can only run one (1) dialup-VPN per FGT. Please check your config and re-read the VPN chapter in the Handbook.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1733 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.