My new 60F Wi-Fi will only do 5 or 2.4ghz which I think is normal.
I am using 2.4ghz since one device is IoT and likes 2.4ghz only.
Many devices are happy but the 16 Pro is not - I tried a few settings and channels (3 choices) and it wont connect.
Any ideas please?
Solved! Go to Solution.
Based also in the Datasheet, this model has a single radio for its built-in wireless interface that can be used for 2.4 or 5 Ghz band. You may consider also adding a FortiAP.
Did you try to enable both 2.4 and 5Ghz?
I didnt know you could, maybe my firmware is old so does not show.
Under profile you can pick one not two which would enable 2.4/5.
How do you do it?
P.s. need to get a forticare so can get firmware
On my old FortiAP I can enable both at the same time. But actually I can't tell if it is supported on FG60F Wi-Fi.
AP I do not and it seems the Fortigate does one or the other. Maybe an upgrade may fix my issue.
Based also in the Datasheet, this model has a single radio for its built-in wireless interface that can be used for 2.4 or 5 Ghz band. You may consider also adding a FortiAP.
User | Count |
---|---|
2547 | |
1354 | |
795 | |
644 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.