- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
1Gb RJ-45 and 1 Gb SFP in 1bond
Hi all!
Can anyone tell me who tried to connect 1Gb RJ-45 and 1 Gb SFP in one bond.
FortiGate 501E
FortiOS 6.0.6
thank you in advance
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It will work. Here I am creating an aggregate with a copper and SFP port (note the different icons)
 
Graham
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I don't know any specificity of 501E or the old 6.0.6 software. But it should work. At least we did in the past when we were running probably 6.2.x and we moved a pair of LAG/LACP ports from RJ45 to SFP. Adding the SFP ports to the LAG first then removed the RJ45 ports. It was between a 1500D HA cluster and a Juniper switch.
Toshi
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks, I hope it works on os 6.0.6 too
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can you refer to the admin guide to ensure the interfaces can be joined in an aggregate?
Graham
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
thanks for the answer, I read the documentation, but I would like to understand whether it will work, based on experience
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It will work. Here I am creating an aggregate with a copper and SFP port (note the different icons)
 
Graham
