Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Robert_Cerny
New Contributor II

100% CPU after 2 mins

Hi,

I have 5 FortiAPs of different types in our offices. The latest one FP221 goes to 100% CPU after 2 mins after boot. Did anyone experienced similar issue? I tried to upgrade firmware from 5.2 to 5.4 but it's still the same...

 

Thanks

Robert

 

FG-100C FG-100A FW-50B FG-60C
FG-100C FG-100A FW-50B FG-60C
4 REPLIES 4
Alby23
Contributor II

Please try to disable DAARP option in the AP Profile and retry.

wanglei_FTNT

please post your related config here. DARRP should not make CPU 100%. Also. the calculation is done on fortigate, not FAP. 

If you happen to have spectrum analysis on, you might want to turn that off since that requires lots of CPU cycles 

Silver

yes same issues for me after disable DAARP cpu back to normal

Robert_Cerny
New Contributor II

Hmm,

DAARP was off, but I had Spectrum Analysis ON for some weird reason. Thanks!

FG-100C FG-100A FW-50B FG-60C
FG-100C FG-100A FW-50B FG-60C
Labels
Top Kudoed Authors