Hi
Have followed this link to setup a S2S between a 60F (local location) and a Draytek Vigor (remote location)
https://www.draytek.com/support/knowledge-base/5203
I have got the tunnel up successfully and can access resources to/from both locations.
I want to make this 1 way now so only the local location can access resources at the remote location
Is it isas simple as only creating the local to remote Policy and not bothering with a remote to local policy?
I have disabled the Remote to Local policy on the 60F after following that guide and that seems to have achieved what i want and stops communication from Remote to local whilst still allowing Local to Remote connectivity, just checking this is all i need to do?
Many Thanks
Many Thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
Yes, you are correct. All you need to do is create a firewall policy allowing the traffic that you want to allow. Any traffic attempts that do not match that policy or any other policy on your FortiGate will be denied.
Hello,
Yes, you are correct. All you need to do is create a firewall policy allowing the traffic that you want to allow. Any traffic attempts that do not match that policy or any other policy on your FortiGate will be denied.
Thankyou for the clarification Tommy
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1561 | |
1034 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.