Hello !
On a FG300C with vdom option enabled, I have configured a lacp aggregate interface (8 physical interfaces), let' s call it " TRUNK_PROD" .
TRUNK_PROD is associated with vdom root.
I then have created several vdom, without any physical interfaces, but only vlan interfaces associated with " TRUNK_PROD" interface.
ex :
edit " TRUNK_PROD"
set vdom " root"
set type aggregate
set member " port1" " port2" " port3" " port4"
edit " VLAN100"
set vdom " vdom01"
set interface " TRUNK_PROD"
edit " VLAN200"
set vdom " vdom02"
set interface " TRUNK_PROD"
It is possible to make such a configuration on the web interface, but is it a good practise / officially supported by fortigate (official doc are welcome ) ?
Do someone use a such configuration without problem ?
