Hello. I am running into an issue setting up managed fortiswitches in an HA environment. I have 2 500e firewalls in HA and 2 524d's. Port 1 firewall 1 goes to port 1 on switch 1. Port 2 firewall 1 goes to switch 2 port 1. Port 1 on firewall 2 goes to switch 1 port 2. Port 2 on firewall 2 goes to switch 2 port 2.
I have setup an aggregate interface and included port 1 and 2. It detects both switches, but one always falls offline.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
What version of FortiOS are you running? Is fortilink-split-interface enabled or disabled?
I am running 6.2.0 on all devices. Fortilink-split-interface is disabled. I have tried it both enabled and disabled with similar results...
Were you able to get this resolved? I am having a very similar issue.
jasinedward wrote:Hello. I am running into an issue setting up managed fortiswitches in an HA environment. I have 2 500e firewalls in HA and 2 524d's. Port 1 firewall 1 goes to port 1 on switch 1. Port 2 firewall 1 goes to switch 2 port 1. Port 1 on firewall 2 goes to switch 1 port 2. Port 2 on firewall 2 goes to switch 2 port 2.
I have setup an aggregate interface and included port 1 and 2. It detects both switches, but one always falls offline.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1698 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.