SSL-VPN Secure Connection Failed

[DANIHOLG]

Hello,

I'm a novice at using FortiGate and I'm testing out Remote Access using SSL-VPN but I'm having issues when I access the Portal Site (See attachment no. 4). I am attaching the test configurations I have, I must be missing something.

Attachments:
1. SSL-VPN Settings
2. SSL-VPN Portals
3. IPv4 Policy
4. Browser Error

Appreciate your help.

[makco10]

Hello,

172.20.120.123 is not a public ip address, you need a public IP address to have access to the SSL-VPN interface from outside your network.

Regards.

[DANIHOLG]

Hi Marcos,

Thanks for your reply.

 I'm using GNS3 VM to simulate , attached is my test topology, will it not work on it?

[makco10]

Yes, you can use GNS3, I think the PC need to be connected from the 172.20.120.0 LAN to simulate a remote pc. 

Regards.

------------------------------
Defend Your Enterprise Network With Fortigate Next Generation Firewall
------------------------------

[DANIHOLG]

I actually run a route add command on my PC like below

route add 172.20.120.0 mask 255.255.255.0 192.168.150.254

Basically, I am able to manage the Fortigate from my PC. But I don't understand why I get an error when I access the portal site.

[MichSara]

I think you need to allow internal traffic back to the SSL-VPN Tunnel interface.
add a policy from internal to SS-VPN interface.

[MichSara]

Actually I take that back, you wont need that for web access.

[Rog_Frei]

switch your browser and test again

[DANIHOLG]

Yeah i tried IE, Firefox and Chrome and nothing worked.

[PC]

What URL do you use to mange the FortiGate and which one do you use to get to the SSLVPN? Assuming you are still working on it.