Fortinet Training Institute
DANIHOLG
New Contributor

SSL-VPN Secure Connection Failed

Hello,

I'm a novice at using FortiGate and I'm testing out Remote Access using SSL-VPN but I'm having issues when I access the Portal Site (See attachment no. 4). I am attaching the test configurations I have, I must be missing something.

Attachments:
1. SSL-VPN Settings
2. SSL-VPN Portals
3. IPv4 Policy
4. Browser Error

Appreciate your help.
UploadedImages_c6yu2kYOTOGFLWkFI8zW_01_SSL-VPN Settings-T.jpg
UploadedImages_xh1pTxvTbWdsSH3MBwvz_02_SSL-VPN Portals-T.jpg
UploadedImages_jZL09W5LSGGQu2xxrpFu_03_IPv4 Policy-T.jpg
UploadedImages_ENCnwjfLTDSJMIj5WQH0_04_Browser Error-T.jpg
16 REPLIES 16
DANIHOLG
New Contributor

http://172.20.120.123 for management then https://172.20.120.123:10443 for SSL-VPN
PC
New Contributor III

Looking at the error "no common encryption algorithm", you are getting a connection but your browser does not support the needed encryption. Sounds like the browsers in the lab need to be updated. Another option might be if you are using a trial license VM, as that does not support SSL. 

"https://support.mozilla.org/en-US/questions/1162402"

DANIHOLG
New Contributor

You are right, I am indeed using a trial license VM. So I guess I won't be able to test my SSL-VPN config after all.
PC
New Contributor III

An old browser might work, or googling and lowering your browser security, but not sure. You may want to check with Fortinet and see if you can get a 15/30 day demo license and that will give you full functionality. That may be a partner only option though. Good luck.
DANIHOLG
New Contributor

Will do, thanks so much!
faruaydi
New Contributor

switch your browser and test again
capricorn80
New Contributor II

I dont think so it will work as you are not using full license based VM.