Hi,
in the config router multicast-flow source address field is mandatory? I wish to create static IGMP groups only based on destination multicast addresses and not on source addresses.
Solved! Go to Solution.
Hello.
It is showing that it is mandatory in CLI. But if you will not set source-address, it will use 0.0.0.0 as any source IP address.
Hello.
It is showing that it is mandatory in CLI. But if you will not set source-address, it will use 0.0.0.0 as any source IP address.
It's really a good idea I could set the source addr 0.0.0.0 . Thanks!
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.