Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
link aggregation between fortigate and cisco switch
are there any steps to be configured on the cisco switch besides creating a port channel in lacp mode. thanks.
i found this.
http://www.cisco.com/c/en/us/td/docs/ios/12_2sb/feature/guide/gigeth.html
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
If the link doesn' t come up, check the configured LACP mode on the switch.
I had this issue before and the mode had to be changed to ' Passive' .
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FWIW
only One side needs to be active but both sides can be active and it will work. I' ve created a post with samples for the most common firewalls.
http://socpuppet.blogspot.com/2014/03/increasing-your-firewall-capacity-via.html
I' m betting you didn' t change the channel protocol to LACP. Post copies of the switch cfg and fortigate if you need help.
BTW: These same units works very will with cisco IOS and NX-OS switches & with or without vPC.
PCNSE
NSE
StrongSwan
PCNSE
NSE
StrongSwan
