i have un fortigate 60d , i removed the cisco switch to manage everything from the firewall. on the cisco switch I had ports in access mode, is it possible to have the same configuration on the firewall ports?
i have configurated hardware switch and free internal
but i can't put internals in access mode on a specific vlan like normal cisco switches. example I have a device that I cannot set the vlan but I have wired on my fortigate and not being on the vlan specification it is not reached by other devices
I wonder then why the hardware switch function. I'm trying
set vdom "root"
set ip 172.25.40.254 255.255.255.0
set allowaccess ping
set alias "QNAP"
set device-identification enable
set role lan
set type physical
set snmp-index 20
set vlanid 40
but when i try the command set vlanid 40 show error
Your attached images are broken. But the hard-switch "config sys virtual-switch" is to have the same set of non-tag + VLANs on a set of multiple physical ports. Then it becomes a single port for configuration.
The 60D will not support "virtual-switch-vlan", (access mode).
Reach out to the fortinet support and ask which models and OS supports the "virtual-switch-vlan". You probably need a newer/bigger model for that, I know it is working on 100E, 100F and 300E as I have configured it myself.