Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Foxx
New Contributor

edit Local-in-policy

On my FG100G I have created a local-in-policy with the command:

config firewall local-in-policy

edit 1

Then I have entered just 'set' and hit enter to see a list of all commands but it did not show any command list.

I entered 'show' and it shows the uuid.

I configured the local-in-policy and when I enter show it shows the policy settings and the uuid.

Do I have to remove the uuid or is this something I don't have to worry about?

 

May thanks in advance 

 

2 Solutions
Toshi_Esumi
Esteemed Contributor II
Yurisk
Valued Contributor

Additionally, you cannot really delete this even if you try to:

 

FGT-7-2-0 (0) # show
config firewall local-in-policy
    edit 1
        set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
    next
end

FGT-7-2-0 (0) # unset uuid 
UUID attribute cannot be unset directly.
Command fail. Return code -37

 

Yuri
https://yurisk.info/ blog: All things Fortinet, no ads.


All opinions are mine only.

View solution in original post

3 REPLIES 3
Toshi_Esumi
Esteemed Contributor II
Foxx

Thank you very much. Have a good one :)

Yurisk
Valued Contributor

Additionally, you cannot really delete this even if you try to:

 

FGT-7-2-0 (0) # show
config firewall local-in-policy
    edit 1
        set uuid 697eaaae-bb29-51ec-dd0e-e7b552859385
    next
end

FGT-7-2-0 (0) # unset uuid 
UUID attribute cannot be unset directly.
Command fail. Return code -37

 

Yuri
https://yurisk.info/ blog: All things Fortinet, no ads.


All opinions are mine only.