command to check for listening ports

[#1]

Hi All, what is the netstat -na equivalent command in fortios? Basically I just want to check what tcp/udp ports are listening.... Many thanks

[ejhardin]

Not currently available.

[emnoc]

Download nmap or get the fortigate pdf sheet that shows all listening ports and services that are supported on that port. I don' t have a link, but Kb fortigate and active ports and you can find the document. So what are you trying to test or determine?

[ede_pfau]

It' s called " Traffic Types and TCP/UDP Ports used by Fortinet Products" and found here: http://kb.fortinet.com/kb/microsites/search.do?cmd=displayKC&docType=kc&externalId=10773

[#5]

Hi all thanks for the replies I just wanted to ensure that udp port 6023 was in a listening state. pretty basic thing really. surprised you cant run a command to tell you so.

[ejhardin]

surprised you cant run a command to tell you so.

Agreed but nmap should do what you need.

[emnoc]

Hi all thanks for the replies I just wanted to ensure that udp port 6023 was in a listening state. pretty basic thing really. surprised you cant run a command to tell you so.

fwiw I don' t think that port is a listener on a FGT series and should be used for forticlients and manager.

[#8]

you are correct it is only for the fortimanager