Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
prot
New Contributor

VPN Site-to-Site access

Hi,

 

We have site-to-site IPsec VPN that works fine.

Our HQ network is 192.168.123.0 and branch is 192.168.10.0

 

Then we have another IPsec VPN that connect to our HQ, the problem is now that when we are connected to HQ VPN we can not acces branch network, already did Firewall policy so its not blocking it but it is still unreachable - Accept: session timeout

 

What else do we need to configure ?

 

Thank you for your help!

5 REPLIES 5
mhe
Contributor II

Do you have setup the routing in your branch office to include the VPN Range via HQ?

prot
New Contributor

Well i believe IPsec Point-to-Point wizard already did it ?

As localy in HQ i can access branch network, only when im connected to HQ IPsec i cant.

mhe
Contributor II

besides believe you can also verify it in the routing monitor

prot
New Contributor

I can see it in routing monitor

spanz
New Contributor III

if the IPSEC tunnels configured to use "no NAT between sites",

On the branch - did you verify that you have a static route points to the protected subnets of the site which is tunneled to the HQ appliance from the other side ?

 

 

 

Labels
Top Kudoed Authors