Hello all!
I'm starting out with Fortigate, and I’m to figure out how to get the cisco be replaces with a FortiGate..
We have ethernet connections from the ISP, where we establish an PPPoE connection, here we get an private ip with a /24 subnet.
Thats where i get stuck, the connection is part of an larger network and were getting an internal subnet from the ISP (sort of MPLS network). So currently using Cisco, were just configuring the Dialer interface and the Vlan with the same ip/subnet and it matches automatically. Can the same be (easily) achieved with the Fortigate?
In the Cisco we have configured something like this:
interface GigabitEthernet0 (Connected to ISP) no ip address pppoe-client dial-pool-number 1
interface Dialer1 ip unnumbered Vlan1 dialer pool 1 dialer-group 1 ppp authentication pap callin ppp pap sent-username xx password xx
interface Vlan1 ip address 10.10.10.1 255.255.255.0
ip route 0.0.0.0 0.0.0.0 Dialer1
Any help is much appreciated, Thanks!
Dennis
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
We got worked around it by changing to BGP, and were able to use the advertised ip internally.
Now another customer, same situation.. we want to use the WAN interface ip as part (gateway) for internal network as described above.
Anyone got a idea how to achieve this?
Thanks!
Dennis
MPLS IPVPN KPN RoutIT
Did u found a solution how to configure it?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1711 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.