I did not find any answer to my issue on this forum,
I have an issue very strange with Forticlient VPN
I connected to a VPN without any problem, i get an IP from VPN range
When i try with Windows 7 (VM) on VMWARE it works fine to connect, i can ping an IP (192.168......)
when i try with Windows 10 (VM) on VMWARE it works fine to connect, but when i try to ping the same IP, it does not work.
When i try with windows 10, on my laptop it works fine to connect, i can ping this iP (192.168...)
We try with differents version 6.0 & 7.0
we compare all our configurations.
We try to add a static route.
We remove IPV6 from our network card and adapter.
Please could you help me :)
Hello @kevin_bieliauskas ,
Could you please confirm following information
- Are you using split tunnel in the VPN config, if yes can you verify the routes on the host after making the VPN connection using the following command
- Please make sure you see the route for the respective IP or subnet via the tunnel, if that is verified we will need to run a sniffer on the firewall to see where the packet is being dropped.