Transparent Mode try to send WOL not success

[tongkai]

place a 90D with Transparent Mode between my router(WAN1) and PC(internal) using FortiOS 5.2 set internal pass all to WAN1 set WAN1 pass all to internal send WOL from router to PC behind 90D cannot wake up I can wake up the PC when both router & PC are in WAN1 or internal interface is there any way to pass WOL through 90D with Transparent Mode?

[netmin]

Hi tongkai, please see this guide. In order to forward other than IP 0x0800 or ARP 0x0806 packets (so ... 0x0842 WOL packets, if used) one needs to " set l2forward enable" on the interfaces.

[tongkai]

Thanks, I' ll try it