Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Anas_Abu_Alrob0599
New Contributor

Speed led lighting Orange

Hi all..

 

On my FortiWiFi 60F v7.0.6 build0366 , speed led lighting Orange / wan1 ... how can i check bandwidth rate and solve,,,,, thank you.

1 REPLY 1
ede_pfau
Esteemed Contributor III

Looks like a 100 Mbps connection.

Try this to confirm:

 

gate8 # get sys int physical wan1
== [onboard]
==[wan1]
mode: static
ip: 10.10.234.1 255.255.255.0
ipv6: ::/0
status: up
speed: 1000Mbps (Duplex: full)

 

It depends on your WAN connection whether 100 Mbps would be a bottleneck or not.

Additional info:

gate8 # diag hardware deviceinfo nic wan1
Description :FortiASIC NP6XLITE Adapter
Driver Name :FortiASIC NP6XLITE Driver
Board :80F
lif id :0
lif oid :64
netdev oid :64
Current_HWaddr 94:ff:3c:35:e4:d2
Permanent_HWaddr 94:ff:3c:35:e4:d2
========== Link Status ==========
Admin :up
netdev status :up
autonego_setting:1
link_setting :1
speed_setting :1000
duplex_setting :0
Speed :1000
Duplex :Full
link_status :Up
============ Counters ===========
Rx Pkts :62860210
Rx Bytes :80248730266
Tx Pkts :33334219
Tx Bytes :6885528921
Host Rx Pkts :52872511
Host Rx Bytes :70254983785
Host Tx Pkts :26490746
Host Tx Bytes :3031272405
Host Tx dropped :0
FragTxCreate :0
FragTxOk :0
FragTxDrop :0

 


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
Labels
Top Kudoed Authors